Rear Wheel Speed Sensor Repair Procedures

DEPOSIT

1. 1
   Remove the rear wheel and tire.

   Tightening torque: 88.3 ~ 108 N·m

2. 2
   Remove the nut (A) and bolt (B) securing the rear wheel speed sensor cable.

   Tightening torque: 7.8 – 11.8 N·m

   

3. 3
   Remove the rear wheel speed sensor cover (A).

   

4. 4
   Disconnect the rear wheel speed sensor connector (A).

   

5. 5
   Remove the rear seat back. (Refer to Body - "Seat".)
6. 6
   Remove the rear wheel arch trim. (Refer to Body - "Interior Trim".)
7. 7
   Disconnect the rear wheel speed sensor connector.
8. 8
   To install, perform the removal procedure in reverse order.

Inspection

1. 1
   Measure the output voltage between the wheel speed sensor terminal and ground.

   

2. 2
   Compare the change in wheel speed sensor output voltage with the normal output voltage change specified below.

   

   V_low: 0.7 V ~ 1.0 V V_high: 1.4 V ~ 2.0 V Frequency range: 1~2500 Hz