Hyundai i20 Quiz
Body Work (Interior and Exterior)

Rear Seat Assembly Repair Procedures

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
8steps
~48min
2/5difficulty
0102030405029.422N·mlb·ft
Tightening torque found on this page
Done 0 of 8

REPLACEMENT

Rear Seat Cushion Assembly
  1. Remove the rear package tray (A).
  2. Remove the luggage compartment cover mat (A).
  3. After loosening the mounting bolts, remove the rear seat cushion (A) by pushing it upward.

    Torque: 19.6 ~ 29 N·m

  4. To install, perform the removal procedure in reverse order.
  5. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat")
  6. Remove the rear seat support cover (A).
  7. After loosening the mounting bolts, remove the entire rear seat back (A).

    Torque: 19.6 ~ 29 N·m

  8. To install, perform the removal procedure in reverse order.
Rear Seat Back Assembly

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.