Body Work (Interior and Exterior)
Rear Seat Back Trim Repair Procedures
In this manual: Body Work (Interior and Exterior)
21steps
~131min
5/5difficulty
1special tools
Done 0 of 21
REPLACEMENT
(LH)
- Remove the rear seat back [G]. (Refer to Rear Seat - "Rear Seat")
- Press the stopper pin (B), then remove the rear seat headrest (A).

- Using a screwdriver or remover, remove the rear seat pop-up cover (A).

- Using a screwdriver or remover, remove the rear center seat belt upper anchor cover (A).

- Remove the hooks (A) located at the lower rear part of the rear seat back trim.

- Open the zipper on the seat back (A), then PULL.

- Remove the anchor trim (A).

- Turn over the rear seat back trim. Then remove the headrest guides (A) by squeezing their ends and removing them.

- Remove the rear seat back trim (A) from the rear frame (B).

- After releasing the hooks (A) on the rear of the seat back, remove the rear seat back trim (B).

- To install, perform the removal procedure in reverse order.

(RH)
- Remove the rear seat back [D].
- Press the stopper pin (B), then remove the rear seat headrest (A).

- Using a screwdriver or remover, remove the rear seat pop-up cover (A).

- Remove the hooks (A) located at the lower rear part of the rear seat back trim.

- Remove the anchor trim (A).

- Open the zipper on the seat back (A), then PULL.

- Turn over the rear seat back trim. Then remove the headrest guides (A) by squeezing their ends and removing them.

- Remove the rear seat back trim (A) from the rear frame.

- After releasing the hooks (A) on the rear of the seat back, remove the rear seat back trim (B).

- To install, perform the removal procedure in reverse order.

Test yourself
A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?