Body Electrical System

INTERIOR POWER MIRROR Repair Procedures

6steps
~36min
2/5difficulty
Done 0 of 6

Inspection

  1. Check each switch position to make sure there is no open circuit between the terminals according to the table below. [Power Mirror Switch]
    [Power Folding Mirror]

DEPOSIT

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver's door trim panel. (Refer to Body - Front Door Trim Panel)
  3. Remove the power window switch (A) after loosening the screw and releasing the hooks (B).

REMEDY

  1. Install the power mirror switch.
  2. Install the front door trim panel after connecting the connector.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.