Check the alignment of the movable glass (C) between the front glass (A) and rear glass (B), and adjust if necessary. Alignment Adjustment Standard value [mm (in.)] (1) Front edge: 0 mm (0 in.) (2) Rear edge: 0 mm (0 in.)
Fully open the movable glass by pressing the sunroof switch.
Remove the sliding cover (A).
Fully close the movable glass by pressing the sunroof switch.
Adjust the glass height by slightly loosening the screws (A).
Use the sunroof emergency operation only to close and open the roof in case of motor malfunction.
Use a hex key to open or close the sunroof after the headliner has been removed. Do not apply excessive force when opening or closing the sunroof. [Sliding Glass Motor "A"][Roller Shade Motor "B"]
If necessary, return the sunroof to its initial position. See the reset method.
Emergency Operation Sunroof Reset: When the one-touch function is enabled by the switch, but the sunroof glass or sunshade does not move automatically and only moves when the switch is held manually, the default setting has been erased. In this case, the sunroof must be reset as described in detail below.
After ALL ON, use the CLOSE switch to fully close the sunroof glass and roller shade.
When the glass and shade are fully closed, release the CLOSE switch, then press and hold the switch (about 10 sec.) until the glass and shade move slightly once.
Release the CLOSE switch, then press and hold the switch again; the glass and shade open and close in the order below, and the sunroof reset process is complete. Opening with sliding shade → tilt-up opening, open with sliding, then close → slide and shade close. ※ If the CLOSE switch is released while performing the above operation, the reset process is canceled and you must return to step 1 and start the process again.
?
Test yourself
A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.
