Repair Procedures

DEPOSIT

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the lower instrument panel cover on the driver's side. (Refer to Body - "Lower Instrument Panel")
3. 3
   Remove the lower/upper panel from the steering column cover. (Refer to Body - "Steering Column Cover")
4. 4
   Remove the wiper switch. (Refer to "Multifunction Switch")
5. 5
   Disconnect the key warning/immobilizer connector (A).

   

6. 6
   Insert the key and turn to "ACC".
7. 7
   Press the stopper pin (A) with a punch.

   

8. 8
   Remove the key cylinder lock (A). B: key warning switch C: ignition switch connector

   

REMEDY

1. 1
   Install the key cylinder lock.
2. 2
   Install the key warning switch.
3. 3
   Install the key warning/immobilizer connector.
4. 4
   Connect the ignition switch connector after installing the ignition switch.
5. 5
   Install the wiper switch.
6. 6
   Install the steering column covers.
7. 7
   Install the lower driver's airbag panel.

Inspection

1. 1
   Disconnect the ignition switch connector (B) and the key emergency switch connector (A) on the steering column.

   

2. 2
   Check the continuity between the terminals.
3. 3
   If not, replace the switch.