Main Instrument Panel Repair Procedures

REPLACEMENT

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the front pillar garnish. (Refer to Interior Trim - "Front Pillar Trim")
3. 3
   Remove the side cowl trim. (Refer to Interior Trim - "Side Cowl Trim")
4. 4
   Remove the audio unit. (Refer to Body Electrical System - Audio Unit)
5. 5
   Remove the center instrument panel. (Refer to Control Panel - Center Control Panel)
6. 6
   Disconnect the photo sensor connector (A).

   

7. 7
   Loosen the mounting screws and remove the upper protective pad [L, R] (A).

   

   

8. 8
   Loosen the mounting bolts (A).

   

9. 9
   Disconnect the smart key antenna connector (A).

   

10. 10
    After loosening the bolts, nuts and mounting screw, remove the main instrument panel (A).

    

11. 11
    Disconnect the passenger airbag connectors (A).

    

12. 12
    To install, perform the removal procedure in reverse order.