Body Electrical System

AVN Remote Control Repair Procedures

10steps
~60min
3/5difficulty
Done 0 of 10

Inspection

  1. Check the resistance between terminals at each switch position (LH).
    [L: Audio + Hands-Free]
    Switch Connector
    Terminal
    Resistance
    (±5%)
    SEEK UP 1 - 6 430 Ω
    SEEK DOWN 1.11 kΩ
    MODE 2.11 kΩ
    MUTE 3.11 kΩ
    VOL (+) 4.61 kΩ
    VOL (-) 6.81 kΩ
    Voice 10.71 kΩ
    END 18.91 kΩ
    SEND 40.91 kΩ
  2. Check the resistance between terminals at each switch position (RH).
    [RH: Trip + Cruise]
    Switch Connector
    Terminal
    Resistance
    (±5%)
    Cancel 2 - 6 330 Ω
    SET - 610 Ω
    VOICE + 910 Ω
    CRUISE ON/OFF 1.38 kΩ
    Cruise Mode 2.13 kΩ
    GROUP 1 - 6 390 Ω
    STEP 610 Ω
    TRIP DOWN 910 kΩ
    Trip OK 1.38 kΩ
    SCC ON/OFF 3.36 kΩ

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering wheel assembly. (Refer to Steering System – Steering Wheel)
  3. Remove the lower steering column cover (A).
  4. Loosen the steering wheel remote control switch mounting screw.
  5. Remove the steering wheel remote control switch (A).

Installation

  1. Install the steering wheel remote control after connecting the connector.
  2. Install the steering wheel.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.