Hyundai Palisade Quiz
General Information

General Torque Chart

In this manual: General Information
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
~5min read

General Information

Standard Bolt Torque Specifications

BOLT (Nominal Diameter) NUT (Nominal Diameter)
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table

BOLT/NUT Normal Screw Torque, N·m (kg·m, ft-lb)
Nominal Diameter
(mm)		 Pitch [mm (in.)] 4T 8T 10T
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
M5 0,8 (0,031) 2,0–3,0 (0,2–0,3, 1,4–2,2) 4,9–6,9 (0,5–0,7, 3,6–5,1) 7,8–10,8 (0,8–1,1, 5,8–8,0)
M6 1 (0,039) 2,9–4,9 (0,3–0,5, 2,2–3,6) 8,8–12,7 (0,9–1,3, 6,5–9,4) 13,7–18,6 (1,4–1,9, 10,1–13,7)
M8 1,25 (0,049) 8,8–11,8 (0,9–1,2, 6,5–8,7) 22,6 - 30,4 (2,3 - 3,1, 16,6 - 22,4) 33,3–44,1 (3,4–4,5, 24,6–32,5)
M10 1,5 (0,059) 16,7–22,6 (1,7–2,3, 12,3–16,6) 45,1 - 60,8 (4,6 - 6,2, 33,3 - 44,8) 65,7–88,3 (6,7–9,0, 48,5–65,1)
M12 1,75 (0,068) 29,4–39,2 (3,0–4,0, 21,7–28,9) 78,5 - 105,9 (8,0 - 10,8, 57,9 - 78,1) 114,7–154,9 (11,7–15,8, 84,6–114,3)
M14 2 (0,078) 47,1 - 63,7 (4,8 - 6,5, 34,7 - 47,0) 125,5–169,7 (12,8–17,3, 92,6–125,1) 183,4 - 249,1 (18,7 - 25,4, 135,3 - 183,7)
M16 2 (0,078) 73,5 - 100,0 (7,5 - 10,2, 54,2 - 73,8) 197,1 - 266,7 (20,1 - 27,2, 145,4 - 196,7) 288,3 - 390,3 (29,4 - 39,8, 212,7 - 287,9)
M20 2,5 (0,098) 144,2 - 195,2 (14,7 - 19,9, 106,3 - 143,9) 396,2 - 535,4 (40,4 - 54,6, 292,2 - 394,9) 565,8 - 764,9 (57,7 - 78,0, 417,3 - 564,2)
M24 3 (0,118) 249,1 - 337,3 (25,4 - 34,4, 183,7 - 248,8) 687,4 - 929,7 (70,1 - 94,8, 507,0 - 685,7) 975,8 - 1320,0 (99,5 - 134,6, 719,7 - 973,6)
M30 3,5 (0,137) 499,2 - 674,7 (50,9 - 68,8, 368,2 - 497,6) 1372,9 - 1858,4 (140,0 - 189,5, 1012,6 - 1370,7) 1956,4 - 2647,8 (199,5 - 270,0, 1443,0 - 1952,9)

BOLT/NUT Fine Thread Torque, N·m (kg·m, ft-lb)
Nominal Diameter
(mm)		 Pitch [mm (in.)] 4T 8T 10T
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
M5 0,5 (0,019) 2,0–3,0 (0,2–0,3, 1,4–2,2) 5,9–8,8 (0,6–0,9, 4,3–6,5) 8,8–12,7 (0,9–1,3, 6,5–9,4)
M6 0,75 (0,029) 3,9–4,9 (0,4–0,5, 2,9–3,6) 9,8–13,7 (1,0–1,4, 7,2–10,1) 14,7–20,6 (1,5–2,1, 10,8–15,2)
M8 1 (0,039) 8,8–11,8 (0,9–1,2, 6,5–8,7) 24,5 - 32,4 (2,5 - 3,3, 18,1 - 23,9) 35,3–48,1 (3,6–4,9, 26,0–35,4)
M10 1,25 (0,049) 17,7–23,5 (1,8–2,4, 13,0–17,4) 47,1 - 63,7 (4,8 - 6,5, 34,7 - 47,0) 69,6 - 94,1 (7,1 - 9,6, 51,4 - 69,4)
M12 1,25 (0,049) 32,4–44,1 (3,3–4,5, 23,9–32,5) 86,3–117,7 (8,8–12,0, 63,7–86,8) 127,5 - 172,6 (13,0 - 17,6, 94,0 - 127,3)
M14 1,5 (0,059) 51,0 - 69,6 (5,2 - 7,1, 37,6 - 51,4) 136,3–185,3 (13,9–18,9, 100,5–136,7) 201,0 - 271,6 (20,5 - 27,7, 148,3 - 200,4)
M16 1,5 (0,059) 79,4 - 107,9 (8,1 - 11,0, 58,6 - 79,6) 211,8 - 286,4 (21,6 - 29,2, 156,2 - 211,2) 311,8 - 421,7 (31,8 - 43,0, 230,0 - 311,0)
M20 1,5 (0,059) 163,8 - 221,6 (16,7 - 22,6, 120,8 - 163,5) 448,2 - 607,0 (45,7 - 61,9, 330,5 - 447,7) 639,4 - 864,9 (65,2 - 88,2, 471,6 - 638,0)
M24 2 (0,078) 276,5 - 373,6 (28,2 - 38,1, 204,0 - 275,6) 759,0 - 1026,8 (77,4 - 104,7, 559,8 - 757,3) 1080,7 - 1462,2 (110,2 - 149,1, 797,1 - 1078,4)
M30 2 (0,078) 562,9 - 762,0 (57,4 - 77,7, 415,2 - 562,0) 1553,4 - 2102,5 (158,4 - 214,4, 1145,7 - 1550,8) 2210,4 - 2991,0 (225,4 - 305,0, 1630,3 - 2206,1)

Flange BOLT (Nominal Diameter) Flange NUT (Nominal Diameter)
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table

Flange BOLT/NUT Standard Thread Torque, N·m (kg·m, ft-lb)
Nominal Diameter
(mm)		 Pitch [mm (in.)] 4T 8T 10T
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
M5 0,8 (0,031) 2,0–2,9 (0,2–0,3, 1,4–2,2) 5,9–7,8 (0,6–0,8, 4,3–5,8) 8,8–11,8 (0,9–1,2, 6,5–8,7)
M6 1 (0,039) 3,9–4,9 (0,4–0,5, 2,9–3,6) 9,8–13,7 (1,0–1,4, 7,2–10,1) 14,7–19,6 (1,5–2,0, 10,8–14,5)
M8 1,25 (0,049) 8,8–11,8 (0,9–1,2, 6,5–8,7) 24,5 - 32,4 (2,5 - 3,3, 18,1 - 23,9) 35,3–48,1 (3,6–4,9, 26,0–35,4)
M10 1,5 (0,059) 17,7–24,5 (1,8–2,5, 13,0–18,1) 48,1 - 65,7 (4,9 - 6,7, 35,4 - 48,5) 70,6 - 96,1 (7,2 - 9,8, 52,1 - 70,9)
M12 1,75 (0,068) 31,4–43,1 (3,2–4,4, 23,1–31,8) 84,3–113,8 (8,6–11,6, 62,2–83,9) 123,6–167,7 (12,6–17,1, 91,1–123,7)
M14 2 (0,078) 51,0 - 68,6 (5,2 - 7,0, 37,6 - 50,6) 135,3–182,4 (13,8–18,6, 99,8–134,5) 198,1 - 268,7 (20,2 - 27,4, 146,1 - 198,2)
M16 2 (0,078) 79,4 - 107,9 (8,1 - 11,0, 58,6 - 79,6) 212,8 - 288,3 (21,7 - 29,4, 157,0 - 212,7) 311,8 - 421,7 (31,8 - 43,0, 230,0 - 311,0)

Flange BOLT/NUT Fine Thread Torque, N·m (kg·m, ft-lb)
Nominal Diameter
(mm)		 Pitch [mm (in.)] 4T 8T 10T
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
Hyundai Palisade. General Tightening Torque Table
M5 0,5 (0,019) 2,9–2,9 (0,3–0,3, 2,2–2,2) 6,9–8,8 (0,7–0,9, 5,1–6,5) 9,8–13,7 (1,0–1,4, 7,2–10,1)
M6 0,75 (0,029) 3,9–5,9 (0,4–0,6, 2,9–4,3) 10,8–14,7 (1,1–1,5, 8,0–10,8) 16,7–21,6 (1,7–2,2, 12,3–15,9)
M8 1 (0,039) 9,8–12,7 (1,0–1,3, 7,2–9,4) 26,5 - 35,3 (2,7 - 3,6, 19,5 - 26,0) 38,2 - 52,0 (3,9 - 5,3, 28,2 - 38,3)
M10 1,25 (0,049) 19,6–25,5 (2,0–2,6, 14,5–18,8) 51,0 - 68,6 (5,2 - 7,0, 37,6 - 50,6) 75,5 - 102,0 (7,7 - 10,4, 55,7 - 75,2)
M12 1,25 (0,049) 35,3–48,1 (3,6–4,9, 26,0–35,4) 94,1 - 126,5 (9,6 - 12,9, 69,4 - 93,3) 138,3 - 186,3 (14,1 - 19,0, 102,0 - 137,4)
M14 1,5 (0,059) 55,9 - 75,5 (5,7 - 7,7, 41,2 - 55,7) 148,1 - 200,1 (15,1 - 20,4, 109,2 - 147,6) 216,7 - 293,2 (22,1 - 29,9, 159,8 - 216,3)
M16 1,5 (0,059) 86,3–116,7 (8,8–11,9, 63,7–86,1) 229,5 - 309,9 (23,4 - 31,6, 169,3 - 228,6) 336,4 - 455,0 (34,3 - 46,4, 248,1 - 335,6)

Hyundai Palisade. General Tightening Torque Table
  1. The torque values in the table are standard values for the following conditions.
  • Nuts and bolts are made of zinc-plated steel rod.
  • Zinc-plated steel washers are inserted.
  • All nuts, bolts and plain washers are dry.
  1. The torque values in the table do not apply.
  • When spring washers, toothed washers, or similar parts are inserted.
  • When plastic parts are fastened.
  • When tapping screws or self-locking nuts are used.
  • When threads and surfaces are coated with oil.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.