Jack and Support Points

General Information

Jack and Support Points

When lifting the vehicle with a two-post lift for underbody service, inspect the underbody and be sure not to damage the floor under the cover, fuel tank, fuel filter and canister.

Since each tire/wheel assembly weighs approximately 30 lb (14 kg), placing the front wheels in the luggage compartment may help distribute the weight. Use the same support points to ensure the vehicle is stable.

1. 1
   Position the lift pads under the support points as shown in the illustration.
2. 2
   Raise the lift a few inches (centimeters) and rock the vehicle to make sure it is securely supported.
3. 3
   Raise the lift to full height to check that the lifting points are securely supported.

   

   

4. 4
   Align the lift with the side sealing of the underbody.
5. 5
   Raise the lift to full height to check that the vehicle is securely supported.

   

6. 6
   Position the vehicle on the lift arms.

   When lifting the vehicle with a scissor lift for underbody service, inspect the underbody and be careful not to damage the floor under the cover, fuel tank, fuel filter and canister. Also use a rubber pad or stand on the side sealing of the vehicle body.

7. 7
   Raise the lift a few inches (centimeters) and rock the vehicle to make sure it is securely supported.
8. 8
   Raise the lift to full height to check that the lifting points are securely supported.