Hyundai Palisade Quiz
Restraints

Repair Procedures

In this manual: Restraints
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
~1min read

Component Replacement After Deployment

Hyundai Palisade. Repair procedures
  • Before performing any SRS repair, use GDS to check for DTCs. Refer to the diagnostic trouble code list to repair the corresponding trouble codes.
If the front airbags deployed after a collision, replace the following parts.
  • SRSCM
  • Deployed airbag(s)
  • Seat belt pretensioner(s)
  • Front impact sensors
  • SRS wiring harnesses
  • Inspect the clock spring for heat damage. If damage is found, replace the clock spring.
If the side/curtain airbags have deployed after a collision, replace the following items.
  • SRSCM
  • Deployed airbag(s)
  • Side impact sensor(s) on the deployed side(s)
  • SRS wiring harnesses
After completing all repairs to the vehicle, make sure the SRS airbag system is functioning properly.
  • Turn the ignition ON. The SRS indicator should illuminate for approximately six seconds and then turn off.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.