Suspension System
Specifications
In this manual: Suspension System
~3min read
Specifications
Front Suspension| Item | Specification | |
| Suspension Type | MacPherson Strut | |
| Shock absorber | Type | Gas |
Rear Suspension
| Item | Specification | |
| Suspension Type | Multi-link | |
| Shock absorber | Type | Gas |
Wheels and Tires
| Item | Specification | ||
| Front | Rear | ||
| Aluminum | 18 inch | 7.5J x 18 | |
| 20 inch | 7.5J x 20 | ||
| Tire | 18 inch | 245/60R18 | |
| 20 inch | 245/50R20 | ||
| Spare Tire | T155/90R18 | ||
| Tire Pressure | 245/60R18 | 240 (35) | 240 (35) |
| 245/50R20 | 240 (35) | 240 (35) | |
| T155/90R18 | 420 (60) | 420 (60) | |
Wheel Alignment
| Item | Specification | ||
| Front | Rear | ||
| Toe | Individual | 0,05° ± 0,1° | 0,1° ± 0,1° |
| General | 0,1° ± 0,2° | 0,2° ± 0,2° | |
| Camber Angle | -0,5° ± 0,5° | -1,0° ± 0,5° | |
| Caster Angle | 4,26° ± 0,5° | - | |
| Kingpin Angle | 13,33° ± 0,5° | - | |
| Ground Clearance | 450.5 ± 10 mm (17.7362 ± 0.3937 in.) |
470 ± 10 mm (18.5039 ± 0.3937 in.) |
|
Front Suspension Tightening Torque
| Item | Tightening Torque (kgf·m) | ||
| N·m | kgf·m | lb-ft | |
| Wheel Hub Nuts | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 |
| Strut Assembly with Steering Knuckle | 156,9 - 176,5 | 16,0 - 18,0 | 115,7 - 130,2 |
| Strut Assembly Lock Nut | 44,1 - 58,8 | 4,5 - 6,0 | 32,5 - 43,4 |
| Lower Arm to Front Subframe (Front) | 117,7 - 137,3 | 12,0 - 14,0 | 86,8 - 101,3 |
| Lower Arm to Rear Subframe (Rear) | 156,9 - 176,5 | 16,0 - 18,0 | 115,7 - 130,2 |
| Lower Arm Ball Joint | 98,1 - 117,7 | 10,0 -12,0 | 72,3 - 86,8 |
| Stabilizer Bar Link to Strut Assembly | 98,1 - 117,7 | 10,0 -12,0 | 72,3 - 86,8 |
| Stabilizer Bar to Stabilizer Link | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 |
| Stabilizer Bar to Subframe | 49,0 - 63,7 | 5,0 - 6,5 | 36,2 - 47,0 |
| Roller Link Bolt and Nut | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 |
| Tie Rod End Nut | 23,5 - 33,3 | 2,4 - 3,4 | 17,4 - 24,6 |
| Universal Joint to Steering Gear Pinion | 32,4 - 37,3 | 3,3 - 3,8 | 23,9 - 27,5 |
| Steering Gear to Subframe | 88,3 - 107,9 | 9,0 - 11,0 | 65,1 - 79,6 |
| Subframe Mounting Bolts (Front) | 156,9 - 176,5 | 16,0 - 18,0 | 115,7 - 130,2 |
| Subframe Mounting Bolts (Rear) | 44,1 - 58,8 | 4,5 - 6,0 | 32,5 - 43,4 |
| Subframe Mounting Bolts | (A) 44.1 - 58.8 | 4,5 - 6,0 | 32,5 - 43,4 |
| (B) 156.9 - 176.5 | 16,0 - 18,0 | 115,7 - 130,2 | |
| Stabilizer Bar Upper Link Bolt | (A) 107.9 - 127.5 | 11,0 - 13,0 | 79,6 - 94,0 |
| (B) 49.0 - 63.7 | 5,0 - 6,5 | 36,2 - 47,0 | |
Rear Suspension
| Item | Tightening Torque (kgf·m) | |||
| N·m | kgf·m | lb-ft | ||
| Wheel Hub Nuts | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 | |
| Pull Arm to Body | 98,1 - 117,7 | 10,0 -12,0 | 72,3 - 86,8 | |
| Pull Arm to Joint | 44,1 - 53,9 | 4,5 - 5,5 | 32,5 - 39,8 | |
| Auxiliary arm to rear subframe | 137,3 - 156,9 | 14,0 -16,0 | 101,3 - 115,7 | |
| Support Arm to Joint | 2WD | 44,1 - 53,9 | 4,5 - 5,5 | 32,5 - 39,8 |
| 4WD | 137,3 - 156,9 | 14,0 -16,0 | 101,3 - 115,7 | |
| Lower Arm Ball Joint | 137,3 - 156,9 | 14,0 -16,0 | 101,3 - 115,7 | |
| Upper Arm to Subframe | 98,1 - 117,7 | 10,0 -12,0 | 72,3 - 86,8 | |
| Upper Arm to Joint | 2WD | 137,3 - 156,9 | 14,0 -16,0 | 101,3 - 115,7 |
| 4WD | 98,1 - 117,7 | 10,0 -12,0 | 72,3 - 86,8 | |
| Shock Absorber Cap to Frame | 2WD | 88,3 - 107,9 | 9,0 - 11,0 | 65,1 - 79,6 |
| Shock Absorber to Frame | 137,3 - 156,9 | 14,0 -16,0 | 101,3 - 115,7 | |
| Shock Absorber to Knuckle | 137,3 - 156,9 | 14,0 -16,0 | 101,3 - 115,7 | |
| Stabilizer Bar to Stabilizer Link | 98,1 - 117,7 | 10,0 -12,0 | 72,3 - 86,8 | |
| Stabilizer Bar to Subframe | 44,1 - 53,9 | 4,5 - 5,5 | 32,5 - 39,8 | |
| Subframe Mounting Bolt and Nut | 176,5 - 215,7 | 18,0 - 22,0 | 130,2 - 159,1 | |
Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?