Other Calculators

Components and Component Location

COMPONENTS

1. Curtain Airbag (CAB)

Description and Operation

Description

Two curtain airbags are installed inside the headlining (left and right) to protect the driver and passenger from injury in a side collision. The airbag module determines whether the curtain airbags should deploy based on signals from the side impact sensors (SIS).

Repair Procedures

DEPOSIT

1. 1
   Disconnect the negative battery cable and wait at least 3 minutes before starting work.
2. 2
   Remove the headliner. (Refer to Body - "Roof Trim")
3. 3
   Disconnect the curtain airbag harness connector.

   

4. 4
   Remove the curtain airbag after loosening the mounting bolts and nuts.

   

REMEDY

1. 1
   Remove the key from the ignition switch.
2. 2
   Disconnect the negative battery cable and wait at least three minutes.
3. 3
   Tighten the curtain airbag mounting bolts and nuts. Tightening torque: Bolt: 9.8 ~ 11.8 N·m Nut: 4.0 ~ 6 N·m
4. 4
   Connect the curtain airbag connector.
5. 5
   Install the headlining. (Refer to Body - Roof Trim)
6. 6
   Connect the battery negative cable.
7. 7
   After installing the curtain airbag (CAB), check that the system operates correctly:

   • Turn the ignition switch to ON; the SRS warning lamp should illuminate for approximately six seconds and then go off.