Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Rear Spoiler Repair Procedures

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
7steps
~42min
2/5difficulty
010203040506.45N·mlb·ft
Tightening torque found on this page
Done 0 of 7

REPLACEMENT

  1. Remove the rear door upper trim. (Refer to Rear Door - Rear Door Trim)
  2. Remove the anti-pinch strip. (Refer to Body Electrical System - Anti-Pinch Strip)
  3. Disconnect the upper stop lamp connector (B) and the washer nozzle (B).
  4. Remove the rear spoiler cover (A).
  5. Loosen the rear spoiler mounting bolts.

    Tightening torque: 5.9 ~ 6.4 N·m

  6. Remove the rear spoiler (A).
  7. To install, perform the removal procedure in reverse order.

    Tightening torque: 5.9 ~ 6.4 N·m

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.