Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Rear Seat Belt Buckle

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
3steps
~18min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Components and Component Location

COMPONENT LOCATION

1. Rear Seat Belt Buckle [L]
2. Rear Seat Belt Buckle [D]		 3. Center Rear Seat Belt Buckle

Repair Procedures

REPLACEMENT

  1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Cushion")
  2. Loosen the bolt and nut, then remove the seat belt buckle from the rear anchor (A). (LH)

    Tightening torque: 39.2 ~ 54 N·m

    (RH)

    Tightening torque: 39.2 ~ 54 N·m

    [Center]

    Tightening torque: 39.2 ~ 54 N·m

  3. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.