Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Front bumper cover

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
6steps
~36min
3/5difficulty
Done 0 of 6

Components and Component Location

COMPONENT LOCATION

1. Front bumper cover

Repair Procedures

REPLACEMENT

  1. Loosen the pin-type retainers and the bumper bolts at the upper front.
  2. Remove the engine undercover (A).
  3. After loosening the pin-type retainers and screws inside the front bumper, disconnect the side portion from the front bumper.
  4. Disconnect the front bumper connector (A). (LH)
    (RH)
  5. Remove the front bumper cover (A).
  6. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.