Body Electrical System
Windshield Defroster Repair Procedure
In this manual: Body Electrical System
4steps
~24min
2/5difficulty
Done 0 of 4
Inspection
- Remove the upper hood cover. (Refer to Body group - "Upper Cowl Cover")
- Disconnect the windshield defroster connector (A).

- Check the continuity between the terminals of the defroster wires.

- Turn the ignition switch and the windshield defroster switch on, then measure the voltage between the terminals of the side defroster bar connector.
OK: Battery voltage (approximately 12 V)

Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?