Body Electrical System
INTERIOR POWER MIRROR
In this manual: Body Electrical System
13steps
~78min
3/5difficulty
Done 0 of 13
Components and Component Location
COMPONENTS

Circuit Diagrams
Wiring Diagram
Power Mirror Folding Switch

INTERIOR POWER MIRROR

Repair Procedures
Inspection
Power Window Switch- Disconnect the negative (-) battery terminal.
- Remove the driver's door trim panel. (Refer to Body - Front Door Trim Panel)
- Disconnect the power mirror switch connector from the door trim panel.

- Check continuity between terminals at each switch position as shown below. [Power Mirror Switch]
[Power Mirror Switch]

DEPOSIT
Driver Window Switch- Disconnect the negative (-) battery terminal.
- Remove the driver side front door trim panel. (Refer to Body - "Front Door Trim Panel")
- Loosen the set screws.

- Remove the armrest from the door trim panel (A).

- Remove the power window switch assembly (A).

- Loosen the mounting screws, then remove the power window switch (A).

REMEDY
- Install the power window switch.
- Install the front door trim panel after connecting the connector.
- Connect the negative (-) battery terminal.
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?