Body Electrical System

REAR WASHER MOTOR Repair Procedures

5steps
~30min
2/5difficulty
Done 0 of 5

Inspection

  1. When the washer motor is connected to the reservoir, fill the washer reservoir with water.
  2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")
  3. Connect the positive (+) battery cable to terminal 3, and the negative (-) battery cable to terminal 2.
  4. Make sure the motor operates correctly and that the washer motor works and water flows from the front nozzles.
  5. If the windshield washer motor is noticed to operate abnormally, replace it. [Front and Rear Washers]
    No. Description
    1 Windshield washer (+)
    2 Ground
    3 Rear Washer (+)

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.