Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Repair Procedures

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
10steps
~60min
3/5difficulty
Done 0 of 10

REPLACEMENT

  1. Remove the front bumper. (Refer to Front Bumper - "Front Bumper Cover")
  2. Remove the headlamps. (Refer to Body Electrical System - "Headlamp".)
  3. Remove the side sill molding. (Refer to Body Side Moldings - Sill Moldings)
  4. Remove the fender garnish. (Refer to Body Side Moldings - Fender Garnish)
  5. Loosen the front wheel guard fixing screws and pin-type clips.
  6. Loosen the fixing clips, then remove the fender apron cover (A).
  7. Using a screwdriver or removal tool, remove the delta trim (A).
  8. Remove the side mounting bracket of the front bumper (A) after loosening the bolts.
  9. Loosen the bolts, screws and fixing nut, then remove the fender (A).
  10. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.