Hyundai Tucson Quiz
Suspension System

Wheel Repair Procedures

In this manual: Suspension System
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
4steps
~24min
2/5difficulty
04080120160200107.980N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Hub Nut Tightening Sequence

  1. Tighten the hub nuts as follows.

    Tightening torque: 88.3 ~ 108 N·m

  2. Raise the vehicle.
  3. Measure the wheel runout with a dial indicator as shown below.
    Canopy Aluminum
    Radial mm (in) Below 0.3 (0.0118)
    Lateral mm (in) Below 0.3 (0.0118)
  4. If the measured value exceeds the specified value, replace the wheel.
Canopy Control

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.