Hyundai Tucson LM Quiz
Body Electrical System

Audio Unit Repair Procedures

In this manual: Body Electrical System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
14steps
~84min
3/5difficulty
Done 0 of 14

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the hazard switch assembly (A).
    Be careful not to damage or scratch the hazard switch assembly and related parts. Apply protective tape to the hazard switch assembly and related parts.
  3. Disconnect the connectors (A).
  4. Remove the center panel (A).
  5. Remove the audio system (A) after loosening the mounting screws.
  6. Disconnect the audio connectors and cable (A), then remove the audio unit completely.
    If the CD does not eject, do not forcibly remove it.

Installation

  1. Connect the audio unit connectors and cable.
  2. Install the audio unit.
  3. Install the center fascia panel.
  4. Install the hazard module.
  5. Connect the negative (-) battery terminal.
    Make sure the connector is connected correctly. Check the audio system.

Disassembly

  1. When separating the CD drive, if necessary, remove the brackets (A) after loosening the screws (6EA).
  2. Remove the screws (4 pcs.) from the head unit, then remove the upper cover (A).
  3. After loosening the screws, remove the CD drive (A).
    Be careful not to damage the cable connectors (B) when removing the drive.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.