Hyundai Tucson LM Quiz
Body (Interior and Exterior)

Front Bumper Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
6steps
~36min
2/5difficulty
Done 0 of 6

Replacement
  • Wear gloves to protect your hands.
  • Using a flat-tip screwdriver wrapped with protective tape to prevent damage, pry carefully.
  • Be careful not to bend or scratch the cover and other parts.
  1. Loosen the bolts and clips securing the upper radiator cover.
  2. Remove the mounting clips.
  3. Loosen the mounting screw and clip on the front bumper side, then disconnect the side portions.
  4. Press the locking pin and disconnect the fog light connector (A).
  5. Remove the front bumper.
  6. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace any damaged clips.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.