Engine Mechanical System
Oil Level Sensor Repair Procedures
In this manual: Engine Mechanical System
3steps
~18min
2/5difficulty
Done 0 of 3
Removal and Installation
[For Europe]
If a malfunction occurs in the oil level sensor signal, refer to the DTC troubleshooting guide.- Drain the engine oil.
- Disconnect the oil level sensor connector, then remove the oil level sensor (A).
Tightening torque: 8.8 - 9.8 N·m

- Installation is the reverse of removal, using a new gasket.
Test yourself
A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?