Hyundai Tucson LM Quiz
Body Electrical System

Power Door Lock Switch Repair Procedures

In this manual: Body Electrical System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

Driver Window Switch
  1. Disconnect the negative battery cable.
  2. Remove the front door trim panel. (Refer to BD group - "Front Door")
  3. Remove the screws from the power window switch (A) and connectors (B). [LHD]
    [Right-hand drive]
  4. Remove the driver's side power window switch (A) from the front door trim panel. [LHD]
    [Right-hand drive]
    Be careful not to damage the hook when removing the switch module.

Installation

Driver Window Switch
  1. Install the driver door module and connectors.
  2. Install the front door trim panel.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.