Body Electrical System
Power Mirror Switch Repair Procedures
In this manual: Body Electrical System
8steps
~48min
2/5difficulty
Done 0 of 8
Removal
Driver's Door Mirror Switch- Disconnect the negative battery cable.
- Remove the front door trim panel. (Refer to BD group - "Front Door")
- Remove the screws from the power window switch (A) and connectors (B). [LHD]
[Right-hand drive]

- Remove the driver's side power window switch (A) from the front door trim panel. [LHD]
[Right-hand drive]

Be careful not to damage the hook when removing the switch module.
Installation
Driver's Door Mirror Switch- Install the driver's side power window switch and connectors.
- Install the front door trim panel.
Inspection
- Remove the front door trim panel and the power door mirror switch module (A). [LHD]
[Right-hand drive]

- Check the continuity between the power door mirror switch terminals as specified in the table.


Test yourself
A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?