Drive Shaft and Axle
Specifications
In this manual: Drive Shaft and Axle
~3min read
Specification
| Items | Inner side | Outer side | |
| Front Driveshaft | Connection Type | TJ | Pinion |
| Max. Allowable Angle | 23,5° | 46,5° | |
| Rear Driveshaft | Connection Type | TJ | Pinion |
| Max. Allowable Angle | 23,5° | 46,5° | |
| Rear Differential | Oil Type | Hypoid gear oil API GL-5, SAE 75W/90 (SHELL SPIRAX X or equivalent) |
|
| Oil Capacity | 0,65 ± 0.1 L | ||
| Gear Type | Hypoid | ||
| Differential Gear Ratio | 2,533 | ||
| Hypoid Gear Backlash | 0.1 ~ 0.15 mm (0.0028 ~ 0.0059 in.) | ||
| Differential Gear Backlash | 0 ~ 0.05 mm (0 ~ 0.0020 in.) | ||
Tightening Torque
| Items | N·m | kgf·m | lb-ft | |
| Waveform | Hex Nut | 88,3 ~ 107,9 | 9,0 ~ 11,0 | 65,1 ~ 79,6 |
| Propeller Shaft Castle Nut | 294,2 ~ 313,8 | 30,0 ~ 32,0 | 217,0 ~ 231,5 | |
| Strut Assembly Lower Mounting Bolt | 137,2 ~ 156,9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | |
| Brake Caliper Mounting Bolt | 78,4 ~ 98,0 | 8,0 ~ 10,0 | 57,8 ~ 72,3 | |
| Wheel speed sensor mounting bolt | 6,9 ~ 10,8 | 0,7 ~ 1,1 | 5,1 ~ 8,0 | |
| Brake Disc Mounting Screw | 4,9 ~ 5,9 | 0,5 ~ 0,6 | 3,6 ~ 4,3 | |
| Hub Assembly Mounting Bolt | 78,4 ~ 98,0 | 8,0 ~ 10,0 | 57,8 ~ 72,3 | |
| Stabilizer Bar Upper Link Bolt | (A) 107.9 ~ 125.5 | 11,0 ~ 13,0 | 79,6 ~ 94,0 | |
| (B) 49.0 ~ 63.7 | 5,0 ~ 6,5 | 36,2 ~ 47,0 | ||
| Lower Arm Ball Joint Mounting Bolt | 98,1 ~ 117,7 | 10,0 ~ 12,0 | 72,3 ~ 86,8 | |
| Tie Rod End Ball Joint Mounting Nut | 23,5~33,3 | 2,4~3,4 | 17,4 ~ 24,6 | |
| Rear | Wheel Hub Nut | 88,3 ~ 107,9 | 9,0 ~ 11,0 | 65,1 ~ 79,6 |
| Propeller Shaft Castle Nut | 274,6 ~ 294,2 | 28,0 ~ 30,0 | 202,5 ~ 217,0 | |
| Shock Absorber Lower Mounting Nut | 137,2 ~ 156,9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | |
| Brake Caliper Mounting Bolt | 49,0 ~ 58,8 | 5,0 ~ 6,0 | 36,2 ~ 43,4 | |
| Wheel speed sensor mounting bolt | 6,9 ~ 10,8 | 0,7 ~ 1,1 | 5,1 ~ 8,0 | |
| Brake Disc Mounting Screw | 4,9 ~ 5,9 | 0,5 ~ 0,6 | 3,6 ~ 4,3 | |
| Hub Assembly Mounting Bolt | 78,5 ~ 88,3 | 8,0 ~ 9,0 | 57,9 ~ 65,1 | |
| Upper Arm Mounting Bolt | 2WD: 137,2 ~ 156,9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | |
| All-wheel drive: 107.9 ~ 117.7 | 11,0 ~ 12,0 | 79,6 ~ 86,8 | ||
| Lower Arm Mounting Bolt | 137,2 ~ 156,9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | |
| Auxiliary Arm Ball Joint Mounting Nut | 2WD: 44,1 ~ 53,9 | 4,5 ~ 5,5 | 32,5 ~ 39,7 | |
| All-wheel drive: 137.2 ~ 156.9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | ||
| Trailing Arm Mounting Bolt | 44,1 ~ 53,9 | 4,5 ~ 5,5 | 32,5 ~ 39,7 | |
| Propeller Shaft X |
Front Propeller Shaft Bolt | 49,0 ~ 68,6 | 5,0 ~ 7,0 | 36,2 ~ 50,6 |
| Propeller Shaft Center Bearing Bracket Mounting Bolt | 49,0 ~ 53,9 | 5,0 ~ 7,0 | 36,2 ~ 50,6 | |
| Rear Differential | Rear Propeller Shaft Bolt | 49,0 ~ 68,6 | 5,0 ~ 7,0 | 36,2 ~ 50,6 |
| Rear Differential Mounting Bolt | 68,6 ~ 88,3 | 7,0 ~ 9,0 | 50,6 ~ 65,1 | |
| Differential Cover Bolt | 39,2 ~ 49,0 | 4,0 ~ 5,0 | 28,9 ~ 36,2 | |
| Rear Differential Drain Plug | 49,0 ~ 68,6 | 5,0 ~ 7,0 | 36,2 ~ 50,6 | |
| Rear Differential Filler Plug | 39,2 ~ 58,8 | 4,0 ~ 6,0 | 28,9 ~ 43,3 | |
Lubricants
| Items | Lubricants | Quantity | ||
| Front Driveshaft | Pinion #25 | P 2.0 | RBA | 130 g |
| Pinion # 24 | NU 2.0 | RBA | 100 g | |
| Pinion # 24 | GAMMA 1.6 GDI | RBA | 100 g | |
| Pinion #25 | UIJ 1.7 | RBA | 130 g | |
| VTJ #25 | P 2.0 | CW-13TJ | 150 g | |
| VTJ #24 | NU 2.0 | CW-13TJ | 120 g | |
| UTD-II #24 | GAMMA 1.6 GDI | CW-13TJ | 150 g | |
| VTJ #24 | UIJ 1.7 | CW-13TJ | 120 g | |
| Rear Driveshaft | LBD #20 | RBA | 40 g | |
| LTD #20 | CW-13TJ | 75 g | ||
Test yourself
A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?