Body Electrical System
Ultrasonic Sensor Repair Procedures
In this manual: Body Electrical System
5steps
~30min
2/5difficulty
Done 0 of 5
Removal
- Remove the rear bumper. (Refer to Group BD - "Rear Bumper")
- Disconnect the sensor connector (A) inside the rear bumper.

- Remove the sensor (A) by opening the sensor holder (B).

Installation
- Connect the connector, then reinstall the sensor.
- Install the rear bumper.
Test yourself
A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?