Body Electrical System
Windshield De-Icer Repair Procedures
In this manual: Body Electrical System
4steps
~24min
2/5difficulty
Done 0 of 4
Inspection
- Remove the hood top cover. (Refer to Wiper)
- Disconnect the windshield de-icer connector (A) from the wiper motor linkage.

- Check for continuity in the de-icer line terminals.

- Turn the ignition and windshield de-icer switch ON, then measure the voltage between the terminals on the wire harness side of the de-icer connector.
OK: Approx. battery voltage (12 V)

Test yourself
A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?