Jeep Grand Cherokee Quiz
Understanding the features of your vehicle

Removing ACC Sensor For Off-Roading

In this manual: Understanding the features of your vehicle
Introduction — 7Things to know before starting your vehicle — 107Understanding the features of your vehicle — 241Understanding your instrument panel — 150Starting and operating — 143What to do in emergencies — 19Maintaining your vehicle — 78Maintenance schedules — 3If you need consumer assistance — 21
~1min read
0102030405097N·mlb·ft
Tightening torque found on this page

To remove the sensor follow these instructions: 1. Unplug the connector by depressing the two tabs on the connector and pulling it out. Do not pull by the wiring or use any tools to remove the connector.

2. Remove the wiring christmas tree attachment from the back of the bracket.

3. Remove the two M6 fasteners that connect the bracket to the bumper.

Store the sensor and bracket assembly in a safe location.

The wiring and connector must be stowed properly after the sensor and bracket assembly is removed.

A connector plug is stowed on top of the bumper beam.

Insert the wiring connector into the connector plug.

To reinstall the sensor and bracket assembly reverse the process above. The fastener torque required to assembly the bracket back to the beam is 6.6 ft lbs (9 N·m).

Test yourself

A quick Jeep Grand Cherokee quiz: every answer comes with an explanation and a link to the manual page.