Brake Pad Wear Inspection

• Remove the brake pads (see Front/Rear Brake Pad Removal in the Brakes chapter).
• Check the lining thickness [A] of the pads in each caliper.

If the lining thickness of either pad is less than the service limit [B], replace both pads in the caliper as a set.

Front Brake Pad [C] Rear Brake Pad [D]

Pad Lining Thickness

Standard:

Front 4.0 mm (0.16 in.)

Rear 4.5 mm (0.18 in.)

Service Limit: 1 mm (0.04 in.)