Kawasaki Ninja ZX-10R Quiz
General information

Clock

In this manual: General information
Specifications — 1Serial number locations — 1Location of parts — 1Loading and accessories information — 1General information — 54Break-in — 1How to ride the motorcycle — 13Safe operation — 4Maintenance and adjustment — 62Storage — 1Troubleshooting guide — 1Your warranty/owner satisfaction — 6Reporting safety defects — 1Location of labels — 1
~1min read

To adjust hours and minutes, do the followings while the motorcycle is at a stop.

  • Turn the ignition switch to “ON”.
  • Display the odometer in the multifunction display. Refer to the “Multifunction Display” item in this section.
  • Push the lower button for more than 2 seconds. Both the hour and minute displays start blinking.

  • Push the lower button. The hour display only blinks. Push the upper button to advance the hours.

  • Push the lower button. The hour display stops blinking and the minute display starts blinking. Push the upper button to advance the minutes.

  • Push the lower button. Both the hour and minute displays start blinking again.
  • Push the upper button. The displays stop blinking and the clock starts working.

NOTE

  • Pushing the upper button momentarily advances the hour or minute step by step. Pushing and holding the button advances the hour or minute continuously.
  • The clock works normally by the back -up power while the ignition switch is turned “OFF”.
  • When the battery is disconnected, the clock is reset to 1:00 and starts working again when the battery is connected.

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.