Kawasaki Ninja ZX-10R Quiz
General information

Stop Watch

In this manual: General information
Specifications — 1Serial number locations — 1Location of parts — 1Loading and accessories information — 1General information — 54Break-in — 1How to ride the motorcycle — 13Safe operation — 4Maintenance and adjustment — 62Storage — 1Troubleshooting guide — 1Your warranty/owner satisfaction — 6Reporting safety defects — 1Location of labels — 1
~2min read

The stop watch can be used in closed course competition.

The stop watch is operated as follows:

  • Push the upper button to display the stop watch.
  • To start the stop watch, push the “START/STOP” switch on the right handlebar switch to the left.
Stop Watch

A. “START/STOP” Switch

  • The stop watch starts timing laps.
  • After each lap, push the LAP/passing button on the left handlebar switch.
Stop Watch

A. LAP/Passing Button

  • The stop watch starts timing the next lap and the previous lap time and the lap number are displayed for ten seconds.

NOTE

The LAP/passing button does not function while the headlight goes on with high beam.

Stop Watch

A. Lap Time

B. Lap Number

  • To stop the stop watch, push the “START/STOP” switch to the left.
  • To display each measured lap time and lap number, push the lower button momentarily when the stop watch is stopped.
  • When the lap number is displayed “– –“, the displayed time is the total time of all timed laps.
  • To reset the stop watch and erase all lap numbers and times, push the lower button and hold it in until the stop watch resets to zero.

NOTE

  • If the ignition switch is turned “OFF” while the lap time/number is displayed, the total time of all timed laps is displayed when the ignition switch is turned “ON”.
  • If the stop watch mode is shifted to other modes during displaying the lap time/number, the lap time or total time of all timed laps are displayed when the stop watch mode is reslected.
  • If the ignition switch is turned “OFF” while counting the lap time, current lap time is cleared. However, previous lap times are stored and previous lap time or total time of all timed laps are displayed when the ignition switch is turned “ON”.
  • When the battery is disconnected, the stop watch is resets to zero.
  • If the “FUEL” warning is displayed in the multifunction display, the coolant temperature or the intake air temperature is displayed instead of lap number.

    However the time measurement is not interrupted.

  • If the coolant temperature rises above 115В°C (239В°F) with the lap number displayed, the lap number display in the Lap Counter/Coolant/Intake Air Temperature Meter automatically shifts to the coolant temperature meter.
  • The lap time can be stored foramaximum of 99 times.

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.