Kawasaki Ninja ZX-10R Quiz
Suspension

Rocker Arm Installation

In this manual: Suspension
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Install the both rocker arms [A] so that their marks [B] face left side.
Rocker Arm Installation

  • Replace the tie-rod nut, rear shock absorber nut and rocker arm nut with new ones.
  • Apply grease to the inside of the oil seals.
  • Tighten: Torque - Rocker Arm Nut: 34 NВ·m (3.5 kgfВ·m, 25 ftВ·lb) Tie-Rod Nuts: 34 NВ·m (3.5 kgfВ·m, 25 ftВ·lb) Rear Shock Absorber Nut (Lower): 34 NВ·m (3.5 kgfВ·m, 25 ftВ·lb)
  • Install the removed parts (see appropriate chapters).

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.