Kawasaki Ninja ZX-10R Quiz
Fuel System (DFI)

Throttle Grip and Cables

In this manual: Fuel System (DFI)
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read

Free Play Inspection

Refer to the Throttle Control System Inspection in the Periodic Maintenance chapter.

Free Play Adjustment

Refer to the Throttle Control System Inspection in the Periodic Maintenance chapter.

Cable Installation

  • Install the throttle cables in accordance with the Cable, Wire, and Hose Routing section in the Appendix chapter.
  • Install the lower ends of the throttle cables in the throttle pulley on the throttle body assy after installing the upper ends of the throttle cables in the grip.
  • After installation, adjust each cable properly (see Throttle Control System Inspection in the Periodic Maintenance chapter).
WARNING

Operation with incorrectly routed or improperly adjusted cables could result in an unsafe riding condition.

Be sure the cables are routed correctly and properly adjusted.

Cable Lubrication

Refer to the Chassis Parts Lubrication in the Periodic Maintenance chapter.

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.