ZX1000JB/KB Models

1. Run the fuse box 2 lead in front of the rib for the fuse box 2.

2. Seat Lock Cable

3. Hook the licence plate light lead and the left turn signal light lead on the projection of the tool kit case.

4. Rib for Fuse Box 2

5. Run the starter relay lead in back of the rib for the fuse box 2 and quick rivet. Take care not to stick the quick rivet.

6. Run the main harness between the rib and projection of the tool kit case.

7. Place all connectors into the dust cover.

8. Viewed from A

9. Run the starter relay lead under the tool kit case.

10. US, CA and CAL Models

11. Hook the licence plate light lead, the left and right turn signal light leads on the projection of the tool kit case.