Body Electrical System
Adaptive Front Lighting System Repair Procedures
In this manual: Body Electrical System
11steps
~66min
3/5difficulty
Done 0 of 11
Removal
- Disconnect the negative (-) battery terminal.
- Using a screwdriver or removal tool, remove the side cover of the airbag (A). [RH]
- Disconnect the plug (B) from the glove box (A).
- Disconnect the air duct (A) from the glove box (B).
- Disconnect the pins (A) and remove the glove box (B).
- Loosen the mounting screws and remove the lower cover protector [RH] (A).
- Disconnect the connector (A) from the AFLS module.
- Remove the AFLS module (A) after loosening the mounting screws.
Installation
- Install the AFLS module.
- Install the lower cover protector and the glove box.
- Connect the negative (-) battery terminal.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?