Body Electrical System
Immobilizer control unit repair procedures
In this manual: Body Electrical System
5steps
~30min
2/5difficulty
Done 0 of 5
Removal
- Disconnect the negative (-) battery terminal.
- Remove the lower driver airbag panel. (Refer to Body - "Driver Airbag Module")
- Disconnect the 5-pin connector of the SMARTRA unit, then remove the SMARTRA unit (A) after loosening the bolt.
Installation
- Install the immobilizer control unit after connecting the unit connector.
- Install the emergency pad lower panel.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?