Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Parking Assist Sensor Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
2/5difficulty
Done 0 of 7

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper cover. (Refer to Body - Rear Bumper Cover)
  3. Disconnect the connector (A) from the parking assist sensor.
  4. Remove the sensor (A) by opening the sensor holder (B).

Installation

  1. Install the rear ultrasonic sensor after connecting the connector.
  2. Install the rear bumper cover.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.