Kia Cadenza VG Owner's Manual Quiz
Body (Interior and Exterior)

Rear Seat Belt Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
11steps
~66min
3/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 11

Replacement

Rear Seat Belt Pretensioner Replacement
  • When installing the seat belt, take care not to damage the pretensioner.
  1. First, remove the following items.
    • Rear Seat Assembly (Refer to Group BD - "Rear Seat")
    • Rear Pillar Garnish (Refer to Group BD - "Interior Trim")
    • Parcel Shelf Trim (Refer to Group BD - "Interior Trim")
  2. Loosen the mounting bolt, then remove the lower anchor of the rear seat belt (A).

    Tightening torque: 39.2 ~ 54 N·m

  3. Loosen the pretensioner mounting bolts (B), then remove the rear seat belt (A).

    Tightening torque: 39.2 ~ 54 N·m

  4. Installation is the reverse of removal.
    • Replace any damaged clips.
Rear Center Seat Belt Pretensioner Replacement
  • When installing the seat belt, take care not to damage the pretensioner.
  1. First remove the following items:
    • Rear Seat Assembly (Refer to Group BD - "Rear Seat")
    • Rear Pillar Trim (Refer to Group BD - "Interior Trim")
    • Parcel Shelf Trim (Refer to Group BD - "Interior Trim")
  2. Loosen the mounting bolt, then remove the rear center seat belt lower anchor (A).

    Tightening torque: 39.2 ~ 54 N·m

  3. Loosen the mounting bolt, then remove the rear center seat belt pretensioner (A).

    Tightening torque: 39.2 ~ 54 N·m

  4. Installation is the reverse of removal.
  5. Remove the rear seat. (Refer to Group BD - "Rear Seat")
  6. Loosen the mounting bolt and remove the rear seat belt buckle (A).

    Tightening torque: 39.2 ~ 54 N·m

    [LH]
    [RH]
  7. Installation is the reverse of removal.
Rear Seat Belt Buckle Replacement

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.