Body Electrical System
Speaker Repair Procedures
In this manual: Body Electrical System
~1min read
Inspection
- Speaker Troubleshooting
- Basic speaker inspection: Check the sound from the speaker, making sure the speaker mounting screws are removed and the wiring connector is connected, to eliminate any possible vibration transmitted from the body trim and surrounding parts.
- Troubleshooting
No. Symptom Inspection/Remedy 1 Rattling Noise - Before replacing the speaker, make sure the mounting screw is installed properly.
- After reinstalling the speaker, make sure there is no rattling noise.
- If the rattling noise occurs again, replace the speaker with a new one.
2 Noise - Check whether the wiring connector is connected properly. If not, connect the wiring connector.
- In case of radio interference, check for noise from the CD.
- If noise is heard when the radio and CD are turned on, replace the speaker with a new one.
3 Poor Performance Check the wiring connection between the battery and the speaker - Before replacing the speaker, check the wiring connection between the battery and the speaker.
- Check the speaker power supply and resistance, then check the sound quality.
- Basic speaker inspection: Check the sound from the speaker, making sure the speaker mounting screws are removed and the wiring connector is connected, to eliminate any possible vibration transmitted from the body trim and surrounding parts.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?