Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Start/Stop Button Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
15steps
~90min
4/5difficulty
Done 0 of 15

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Using a screwdriver or trim removal tool, remove the lower panel of the center panel (A).
  3. Remove the air duct (A) and disconnect the connectors (B) from the heater and A/C control unit.
  4. Using a screwdriver or removal tool, remove the [RH] trim panel (A).
  5. Remove the AVN head unit (A) after loosening the mounting screws.
  6. Disconnect the connectors (A) from the AVN head unit.
  7. Using a screwdriver or pry tool, remove the crash pad side cover (A).
  8. Remove the lower panel of the crash pad (A) after loosening the mounting screws.
  9. Disconnect the connectors (A).
  10. Remove the airbag center panel (A) after loosening the mounting screws.
  11. Remove the ignition key bezel (A) after loosening the mounting screws.
  12. Disconnect the connector of the start/stop button (A).
  13. Remove the start/stop button (A) by pressing both sides of the hooks.

Installation

  1. Install the Start/Stop button.
  2. Install the center airbag panel, lower crash pad panel, AVN head unit, heater and A/C control unit, and lower center panel.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.