Troubleshooting

Troubleshooting

Limp Home Mode

Features a fail-safe function that prevents hazardous situations in the event of a transaxle malfunction. The vehicle will operate in limp-home mode if a transaxle malfunction occurs. In this mode, the transaxle operates at a minimum functional level (fixed gear, limited shifting, reverse, neutral), allowing the vehicle to reach a service center.Troubleshooting

Symptom of Malfunction	Suspected Area	Remedy
Shift Delay, Shift Shock, Poor Acceleration	Clutch/brake damaged	Replace the brake or clutch.
	Faulty hydraulic control	Inspect the solenoid valve.
	Faulty hydraulic supply	Check the fluid level.
		Check fluid cleanliness.
		Replace the oil pump.
	TCM learning not performed	Perform TCM adaptive learning values.
Mechanical Fail-Safe Mode (locked in 4th gear, manual shifting disabled)	Faulty solenoid valve	Inspect the solenoid valve.
		Replace the valve body.
	Faulty TCM	Replace the TCM.
	Faulty CAN communication	Inspect the CAN communication line.
Limp Home Mode (locked in 4th gear, manual shift 2nd to 4th enabled)	Faulty input and output speed sensor	Replace the input and output speed sensors.
Limp Home Mode (1st to 2nd shift disabled, 3rd to 6th shift enabled)	Faulty lock switch	Replace the inhibitor switch.
Manual shift disabled	Faulty TCM	Replace the TCM.
	Faulty connector connection	Check the connection of the manual mode connector.
	Faulty manual mode switch	Replace the manual mode switch housing.