Driving your vehicle
Adjusting regenerative braking with paddle shifter
In this manual: Driving your vehicle
~1min read
The regenerative braking system allows you to charge the battery when you use the brakes to stop the vehicle.
Adjusting regenerative braking with paddle shifter


Operation
- Pull the left side (
) of the paddle shifter to increase regenerative braking and deceleration. - Pull the right side (
) of the paddle shifter to decrease regenerative braking and deceleration.
Non-operating condition(s)
- The left side (
) and right side (
) of paddle shifters are pulled simultaneously. - Decelerating the vehicle by depressing the brake pedal.
- Cruise Control or Smart Cruise Control is operating.
- The regenerative braking system is activated in 100% charge.
- The vehicle is in SNOW mode.
- The trailer is installed.
Regenerative braking system according to DRIVE MODE
- Initial setting of the regenerative braking level and adjustable range vary according to the selected drive mode.
- The setting will return to 1 when the vehicle is restarted from 0.
- For more details, refer to "Drive mode integrated control system"

Was this page helpful?