Dual Clutch Assembly Repair procedures
Removal
Remove the hybrid drive motor & dual clutch transmission assembly from the vehicle.
(Refer to DCT System - "DCT")
Remove the hybrid drive motor assembly from the DCT assembly.
(Refer to Hybrid Motor System - "Hybrid Drive Motor Assembly")
Remove the spline hub (B) after removing a retaining ring (A).

Remove the snap ring (A).

Remove the dual clutch assembly (A) by using the special service tool (09430-C1180).

Installation
Install the double clutch assembly (A) by using double clutch installer (09430-2A240).


Install the snap ring (A).

Install the spline hub (B) and the retaining ring (A).

Install the hybrid drive motor assembly to the DCT assembly.
(Refer to Hybrid Motor System - "Hybrid Drive Motor Assembly")
Install the hybrid drive motor & dual clutch transmission assembly to the vehicle.
(Refer to DCT System - "DCT")