Body Electrical System

ESCL(Electronic Steering Column Lock) Repair procedures

8steps
~48min
3/5difficulty
010203040501310N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Removal

  1. Disconnect the negative(-) battery terminal.

  2. Remove the crash pad lower panel.

    (Refer to Body - "Crash Pad Lower Panel")

  3. Remove the steering column upper and lower shrouds.

    (Refer to Body - "Steering Column Shroud Panel")

  4. Disconnect the electronic steering column lock connector (A).

  5. Remove the electronic steering column lock (A).

    (Refer to Steering System - "Steering Column and Shaft")

Installation

  1. Install the electronic steering column lock.

    Tightening torque : 7.0 - 13 N·m

  2. Install the steering column.

  3. Install the crash pad lower panel.