Body Electrical System
Start/Stop Button Repair procedures
In this manual: Body Electrical System
10steps
~60min
3/5difficulty
Done 0 of 10
Removal
Disconnect the negative (-) battery terminal.
Remove the crash pad side cover [RH] (A).

Remove the crash pad plate [RH] (A) after loosening the mounting screws.

Disconnect the start/stop button connector (A).

Remove the start/stop button (A) after loosening the mounting screws.

Installation
Install the start/stop button.
Connect the start/stop button connector.
Install the crash pad plate [RH].
Install the crash pad side cover [RH].
Connect the negative (-) battery terminal.
Was this page helpful?