Body (Interior and Exterior)
Floor Console Assembly Repair procedures
In this manual: Body (Interior and Exterior)
12steps
~72min
3/5difficulty
Done 0 of 12
Replacement
Pull out and remove the gear knob and gear boots (A).

Separate the floor console upper cover (A) by using a remover.

Remove the floor console upper cover after disconnecting the connectors (A).

Separate the floor console tray assembly (A).

Remove the floor console tray after disconnecting the connectors (A).

Remove the side console side covers (A) on both sides by pushing them rearward.

Remove the console armrest mat (A).

Loosen the console upper mounting bolts (A).

Separate the console assembly after loosening the screws.
[Front]

[Rear]

Disconnect the console wiring connector (A).

Remove the console complete (A).

Install in the reverse order of removal.
Was this page helpful?