Body (Interior and Exterior)
Front Door Outside Handle Repair procedures
In this manual: Body (Interior and Exterior)
6steps
~36min
2/5difficulty
Done 0 of 6
Replacement
Remove the front door module.
(Refer to Front Door - "Front Door Module")
Remove the plug hole cap (A) and then loosen the bolt.
Tightening torque : 3.4 - 5,7 N·m

Remove the door lock assembly (A).

Disconnect the front door outside handle connector (A).

Remove the front door outside handle (A) by sliding it rearward.

Install in the reverse order of removal.
Was this page helpful?