Body (Interior and Exterior)
Front Seat Belt Retractor Repair procedures
In this manual: Body (Interior and Exterior)
5steps
~30min
2/5difficulty
Done 0 of 5
Replacement
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
Disconnect the connector (A).

Remove the front seat belt upper anchor (A) after loosening the mounting bolt.
Tightening torque : 39.2 - 54 N·m

Remove the front seat belt retractor (A) after loosening the bolts.
Tightening torque :
Lower : 39.2 - 54 N·m
Upper : 7.8 - 11,8 N·m

Install in the reverse order of removal.
Was this page helpful?